{"id":7120,"date":"2020-09-08T10:45:04","date_gmt":"2020-09-08T08:45:04","guid":{"rendered":"https:\/\/elhco.pruebasweb.com.es\/?page_id=7120"},"modified":"2026-03-16T10:54:50","modified_gmt":"2026-03-16T09:54:50","slug":"quality-control","status":"publish","type":"page","link":"https:\/\/elhco.com\/en\/quality-control\/","title":{"rendered":"Quality control"},"content":{"rendered":"

<\/div><\/div>

CHEMICAL LABORATORY<\/h2><\/div>
<\/div><\/div>

Our chemical laboratory<\/strong> is equipped to carry out daily controls of the most necessary analyses and not depend on external laboratories. In this way, the baths are permanently monitored and within specification. For this task, the laboratory has the following measurement equipment:<\/p>\n<\/div><\/div><\/div>

<\/div><\/div><\/div><\/div><\/div>

pH-meter<\/h3>

pH is one of the parameters that is analysed the most since it plays a very important role in other parameters such as salts solubility, reaction speed or electrodeposition speed.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

Ionometer<\/h3>

The ionometer is an instrument used for the specific determination of an ion by means of ion selective electrodes (ISE). Elhco has an ISE for the measurement of chlorides and fluorides.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

Conductivity meter<\/h3>

Purity of and its quality is mainly determined by conductivity, which provides a direct measure of all dissolved ions. Conductivity measurement is crucial for bath formulation and washing waters. <\/p><\/div><\/div><\/span><\/div><\/div><\/div>

Burettes<\/h3>

The so-called automatic titration burettes are basic tools for titrations. With this technique, multiple analyses can be carried out, such as the determination of the alkalinity\/acidity of a bath, metal content, and reductant content, among others.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

Rectifier<\/h3>

It is used in Hull cell testing to analyse the main parameters of the electrolytic baths as well as the deposition speed. Then, optimisations of the working parameters can be made to obtain the best quality.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

Salt spray chamber<\/h3>

Elhco has a 1000-litre salt spray chamber to carry out accelerated corrosion tests using neutral salt spray in accordance with ISO 9227 and ASTM B117 specifications.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

Balances<\/h3>

Balances with different precisions depending on the use: highly precise analytical balances for analyte quantitative analysis and granatary balances for the formation of baths and qualitative level analysis. <\/p><\/div><\/div><\/span><\/div><\/div><\/div>

Spectrophotometer UV-Vis<\/h3>

Our visible spectrum benchtop spectrophotometer (320 \u2013 1100 nm) allows quick and accurate measurement of a wide range of ions in aqueous medium.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

Karl Fischer Titrator<\/h3>

This equipment is used for determining the water content in organic reagents, according to ISO 760 standard.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

\"Tensiometer\"

Tensiometer<\/h3>

The force tensiometer is an instrument for measuring surface and interfacial tension using the ring tear method. It performs quick, simple, and accurate measurements of surfactant solutions and solvents.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

\"Automatic

Automatic titrator <\/h3>

The equipment is suitable for conventional potentiometric titration applications, facilitating the quantitative determination of a wide range of analytes with high accuracy, reproducibility, and speed of analysis.<\/p><\/div><\/div><\/span><\/div><\/div><\/div><\/div><\/div>

<\/div><\/div>

METALLOGRAPHIC LABORATORY<\/h2><\/div>
<\/div><\/div>

The metallographic laboratory is fully equipped to carry out measurements of the physical properties of the deposited layers for compliance validation of the requirements of the specifications.<\/p>\n<\/div><\/div><\/div>

<\/div><\/div><\/div><\/div><\/div>
\"\"

X-ray difractometer<\/h3>

With the X-ray diffractometer, the layer thickness of a given metal or alloy can be measured, as well as the determination of its composition.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

X-ray difractometer<\/h3>

With the X-ray diffractometer, the layer thickness of a given metal or alloy can be measured, as well as the determination of its composition.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

X-ray difractometer<\/h3>

With the X-ray diffractometer, the layer thickness of a given metal or alloy can be measured, as well as the determination of its composition.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

X-ray difractometer<\/h3>

With the X-ray diffractometer, the layer thickness of a given metal or alloy can be measured, as well as the determination of its composition.<\/p><\/div><\/div><\/div><\/div><\/div><\/div>

<\/i><\/div>
<\/i><\/div><\/div><\/div><\/div><\/div>
\"\"

Magnifiers<\/h3>

Elhco has various magnifiers, both optical and digital, to be able to analyse surfaces with greater definition and discern between possible defects.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Magnifiers<\/h3>

Elhco has various magnifiers, both optical and digital, to be able to analyse surfaces with greater definition and discern between possible defects.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Magnifiers<\/h3>

Elhco has various magnifiers, both optical and digital, to be able to analyse surfaces with greater definition and discern between possible defects.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Magnifiers<\/h3>

Elhco has various magnifiers, both optical and digital, to be able to analyse surfaces with greater definition and discern between possible defects.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Magnifiers<\/h3>

Elhco has various magnifiers, both optical and digital, to be able to analyse surfaces with greater definition and discern between possible defects.<\/p><\/div><\/div><\/div><\/div><\/div><\/div>

<\/i><\/div>
<\/i><\/div><\/div><\/div><\/div><\/div>
\"\"

Endoscope\/boroscope<\/h3>

It allows the observation of holes interiors whern it is impossible the observation to the naked eye. With the digital vision camera, photographs of the defects can be taken.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Endoscope\/boroscope<\/h3>

It allows the observation of holes interiors whern it is impossible the observation to the naked eye. With the digital vision camera, photographs of the defects can be taken.<\/p><\/div><\/div><\/div><\/div><\/div><\/div>

<\/i><\/div>
<\/i><\/div><\/div><\/div><\/div><\/div>
\"\"

Microdurometer<\/h3>

Surface hardness of the deposited metal layers can be measured. It checks the effectiveness of heat treatments after metallisation<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Microdurometer<\/h3>

Surface hardness of the deposited metal layers can be measured. It checks the effectiveness of heat treatments after metallisation<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Microdurometer<\/h3>

Surface hardness of the deposited metal layers can be measured. It checks the effectiveness of heat treatments after metallisation<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Microdurometer<\/h3>

Surface hardness of the deposited metal layers can be measured. It checks the effectiveness of heat treatments after metallisation<\/p><\/div><\/div><\/div><\/div><\/div><\/div>

<\/i><\/div>
<\/i><\/div><\/div><\/div><\/div><\/div>
\"\"

Durometer<\/h3>

The durometer is used to measure the hardness of the base material. With it, we can check the hardness of different types of materials such as steel, cast iron, among others.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Durometer<\/h3>

The durometer is used to measure the hardness of the base material. With it, we can check the hardness of different types of materials such as steel, cast iron, among others.<\/p><\/div><\/div><\/div><\/div><\/div><\/div>

<\/i><\/div>
<\/i><\/div><\/div><\/div><\/div><\/div>
\"\"

Roughometer<\/h3>

It makes a surface roughness profile, in certain processes, the surface roughness is essential since it plays an important role in the adherence of the coatings.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Roughometer<\/h3>

It makes a surface roughness profile, in certain processes, the surface roughness is essential since it plays an important role in the adherence of the coatings.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Roughometer<\/h3>

It makes a surface roughness profile, in certain processes, the surface roughness is essential since it plays an important role in the adherence of the coatings.<\/p><\/div><\/div><\/div><\/div><\/div><\/div>

<\/i><\/div>
<\/i><\/div><\/div><\/div><\/div><\/div>
\"\"

Coating thickness gauge<\/h3>

For thickness measurement using the eddy current technique or magnetic induction.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Coating thickness gauge<\/h3>

For thickness measurement using the eddy current technique or magnetic induction.<\/p><\/div><\/div><\/div><\/div><\/div><\/div>

<\/i><\/div>
<\/i><\/div><\/div><\/div><\/div><\/div>
\"\"

Micrometers<\/h3>

Measuring devices with micrometric reliability for various sizes, for exterior and interior measurements. It is capable of extremely precise measurements.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Micrometers<\/h3>

Measuring devices with micrometric reliability for various sizes, for exterior and interior measurements. It is capable of extremely precise measurements.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Micrometers<\/h3>

Measuring devices with micrometric reliability for various sizes, for exterior and interior measurements. It is capable of extremely precise measurements.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

Micrometers<\/h3>

Measuring devices with micrometric reliability for various sizes, for exterior and interior measurements. It is capable of extremely precise measurements.<\/p><\/div><\/div><\/div><\/div><\/div><\/div>

<\/i><\/div>
<\/i><\/div><\/div><\/div><\/div><\/div>
\"\"

METALLOGRAPHIC ANALYSIS<\/h3>

It's the study of the microstructure of a metal, such as grain size, inclusions, phases, and other constituents. In this analysis, our goal is to determine whether the material has been processed correctly, both initially and after treatment.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

SECTIONING MACHINE<\/h3>

Metallographic cutting is the first step in the preparation of metallographic analysis samples. With this equipment, we can perform on-site sample cutting quickly and accurately.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

MOUNTING (COLD)<\/h3>

Mounting is the second step in the preparation of metallographic analysis samples. It is used to protect the piece obtained in the cutting phase and to achieve perfect edge retention. At Elhco, we have the necessary materials to perform optimal mounting of the piece.<\/p><\/div><\/div><\/div><\/div><\/div>

\"\"

POLISHING MACHINE<\/h3>

Polishing is the third step in metallographic analysis and aims to remove scratches and obtain a specular surface on the sample contained in the pellet before conducting the analysis under the microscope.<\/p><\/div><\/div><\/div><\/div><\/div><\/div>

<\/i><\/div>
<\/i><\/div><\/div><\/div><\/div><\/div>
\"Abras\u00edmetro

Taber rotatory abraser<\/h3>

We have a high-precision rotational abrasimeter, specially designed to perform accelerated wear tests on a wide range of materials. This test is performed at Elhco according to ASTM D4060-19.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

\"Electrical

Electrical conductivity meter <\/h3>

This equipment allows us to quickly and non-destructively determine the electrical conductivity of aluminum and its alloys. Additionally, the results obtained can be correlated with certain mechanical properties of the alloy, such as hardness. This test is performed according to AITM 6-6004.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

\"Immersion

Immersion tank for liquid resistance<\/h3>

This equipment is used to determine the resistance of paint systems to the action of liquids, using the water immersion method at controlled temperature, according to ISO 2812\/2.<\/p><\/div><\/div><\/span><\/div><\/div><\/div>

\"Anodising

Anodising thickness detector<\/h3>

This equipment allows for the rapid, in-situ determination of whether an aluminum part has been properly anodised, in accordance with Airbus AITM 6-9004. The detector is based on the difference in electrical resistance between anodised and non-anodised surfaces, as the oxide layer formed during anodising exhibits significantly higher electrical resistance.<\/p><\/div><\/div><\/span><\/div><\/div><\/div><\/div><\/div>

REQUEST A QUOTE<\/h2><\/div>
<\/div><\/div>

Ask us for more information<\/strong> about our technical surface treatments and services. We listen to your needs and offer you a solution of the highest quality and security. We can work in short series or in long-term productions.<\/p>\n<\/div>

<\/i>Get a quote<\/span><\/a><\/div><\/div><\/div><\/div><\/div>

REQUEST A QUOTE<\/h2><\/div>
<\/div><\/div>

Ask us for more information<\/strong> about our technical surface treatments and services. We listen to your needs and offer you a solution of the highest quality and security. We can work in short series or in long-term productions.<\/p>\n<\/div>

<\/i>Get a quote<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":6919,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"100-width.php","meta":{"footnotes":""},"class_list":["post-7120","page","type-page","status-publish","has-post-thumbnail","hentry"],"yoast_head":"\nCoating test laboratories - ELHCO<\/title>\n<meta name=\"description\" content=\"As part of our quality control, we have two internal coating testing laboratories.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/elhco.com\/en\/quality-control\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Coating test laboratories - ELHCO\" \/>\n<meta property=\"og:description\" content=\"As part of our quality control, we have two internal coating testing laboratories.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/elhco.com\/en\/quality-control\/\" \/>\n<meta property=\"og:site_name\" content=\"Elhco - Empresa de recubrimientos galv\u00e1nicos\" \/>\n<meta property=\"article:modified_time\" content=\"2026-03-16T09:54:50+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/elhco.com\/wp-content\/uploads\/c-calidad.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"1915\" \/>\n\t<meta property=\"og:image:height\" content=\"517\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"16 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/quality-control\\\/\",\"url\":\"https:\\\/\\\/elhco.com\\\/en\\\/quality-control\\\/\",\"name\":\"Coating test laboratories - ELHCO\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/quality-control\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/quality-control\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/elhco.com\\\/wp-content\\\/uploads\\\/c-calidad.webp\",\"datePublished\":\"2020-09-08T08:45:04+00:00\",\"dateModified\":\"2026-03-16T09:54:50+00:00\",\"description\":\"As part of our quality control, we have two internal coating testing laboratories.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/quality-control\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/elhco.com\\\/en\\\/quality-control\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/quality-control\\\/#primaryimage\",\"url\":\"https:\\\/\\\/elhco.com\\\/wp-content\\\/uploads\\\/c-calidad.webp\",\"contentUrl\":\"https:\\\/\\\/elhco.com\\\/wp-content\\\/uploads\\\/c-calidad.webp\",\"width\":1915,\"height\":517,\"caption\":\"Laboratorios de pruebas de recubrimientos - ELHCO\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/quality-control\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Portada\",\"item\":\"https:\\\/\\\/elhco.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Quality control\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/elhco.com\\\/en\\\/\",\"name\":\"Elhco - Empresa de recubrimientos galv\u00e1nicos\",\"description\":\"ELHCO\",\"publisher\":{\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/#organization\"},\"alternateName\":\"Tratamientos superficiales Elhco - Electroless Hard Coat\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/elhco.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/#organization\",\"name\":\"Elhco, electroless hard coat, S.A.\",\"alternateName\":\"ELHCO\",\"url\":\"https:\\\/\\\/elhco.com\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/elhco.com\\\/wp-content\\\/uploads\\\/logo-azul-web-retina.webp\",\"contentUrl\":\"https:\\\/\\\/elhco.com\\\/wp-content\\\/uploads\\\/logo-azul-web-retina.webp\",\"width\":510,\"height\":200,\"caption\":\"Elhco, electroless hard coat, S.A.\"},\"image\":{\"@id\":\"https:\\\/\\\/elhco.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Coating test laboratories - ELHCO","description":"As part of our quality control, we have two internal coating testing laboratories.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/elhco.com\/en\/quality-control\/","og_locale":"en_US","og_type":"article","og_title":"Coating test laboratories - ELHCO","og_description":"As part of our quality control, we have two internal coating testing laboratories.","og_url":"https:\/\/elhco.com\/en\/quality-control\/","og_site_name":"Elhco - Empresa de recubrimientos galv\u00e1nicos","article_modified_time":"2026-03-16T09:54:50+00:00","og_image":[{"width":1915,"height":517,"url":"https:\/\/elhco.com\/wp-content\/uploads\/c-calidad.webp","type":"image\/webp"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"16 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/elhco.com\/en\/quality-control\/","url":"https:\/\/elhco.com\/en\/quality-control\/","name":"Coating test laboratories - ELHCO","isPartOf":{"@id":"https:\/\/elhco.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/elhco.com\/en\/quality-control\/#primaryimage"},"image":{"@id":"https:\/\/elhco.com\/en\/quality-control\/#primaryimage"},"thumbnailUrl":"https:\/\/elhco.com\/wp-content\/uploads\/c-calidad.webp","datePublished":"2020-09-08T08:45:04+00:00","dateModified":"2026-03-16T09:54:50+00:00","description":"As part of our quality control, we have two internal coating testing laboratories.","breadcrumb":{"@id":"https:\/\/elhco.com\/en\/quality-control\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/elhco.com\/en\/quality-control\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/elhco.com\/en\/quality-control\/#primaryimage","url":"https:\/\/elhco.com\/wp-content\/uploads\/c-calidad.webp","contentUrl":"https:\/\/elhco.com\/wp-content\/uploads\/c-calidad.webp","width":1915,"height":517,"caption":"Laboratorios de pruebas de recubrimientos - ELHCO"},{"@type":"BreadcrumbList","@id":"https:\/\/elhco.com\/en\/quality-control\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Portada","item":"https:\/\/elhco.com\/en\/"},{"@type":"ListItem","position":2,"name":"Quality control"}]},{"@type":"WebSite","@id":"https:\/\/elhco.com\/en\/#website","url":"https:\/\/elhco.com\/en\/","name":"Elhco - Empresa de recubrimientos galv\u00e1nicos","description":"ELHCO","publisher":{"@id":"https:\/\/elhco.com\/en\/#organization"},"alternateName":"Tratamientos superficiales Elhco - Electroless Hard Coat","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/elhco.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/elhco.com\/en\/#organization","name":"Elhco, electroless hard coat, S.A.","alternateName":"ELHCO","url":"https:\/\/elhco.com\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/elhco.com\/en\/#\/schema\/logo\/image\/","url":"https:\/\/elhco.com\/wp-content\/uploads\/logo-azul-web-retina.webp","contentUrl":"https:\/\/elhco.com\/wp-content\/uploads\/logo-azul-web-retina.webp","width":510,"height":200,"caption":"Elhco, electroless hard coat, S.A."},"image":{"@id":"https:\/\/elhco.com\/en\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/elhco.com\/en\/wp-json\/wp\/v2\/pages\/7120","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/elhco.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/elhco.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/elhco.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/elhco.com\/en\/wp-json\/wp\/v2\/comments?post=7120"}],"version-history":[{"count":10,"href":"https:\/\/elhco.com\/en\/wp-json\/wp\/v2\/pages\/7120\/revisions"}],"predecessor-version":[{"id":9018,"href":"https:\/\/elhco.com\/en\/wp-json\/wp\/v2\/pages\/7120\/revisions\/9018"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/elhco.com\/en\/wp-json\/wp\/v2\/media\/6919"}],"wp:attachment":[{"href":"https:\/\/elhco.com\/en\/wp-json\/wp\/v2\/media?parent=7120"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}